9
7. Hold a Bolt Spacer (84) inside the lower end of
the Left Upright (77). Insert a 3/8" x 4" Bolt (5)
with a 3/8" Star Washer (12) into the Left
Upright and the Bolt Spacer.
Repeat this step
with a second Bolt Spacer (84), 3/8" x 4" Bolt
(5), and 3/8" Star Washer (12).
Hold the Left Upright Spacer (82) and the Left
Upright (77) against the Base (60). Tighten the
3/8" x 4" Bolts (5) until the heads of the Bolts
touch the Left Upright;
do not fully tighten the
Bolts yet.
With the help of a second person, tip the tread-
mill so that the Base (60) is flat on the floor.
82
77
5
60
84
84
12
7
6. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (53) so the treadmill is more stable;
do
not fully fold the Frame yet.
Remove and discard the two indicated bolts (A)
and the shipping bracket (B).
Attach a Wheel (90) with the 3/8" x 2" Bolt (3)
and the 3/8" Locknut (11) that you removed in
step 1.
Do not overtighten the Nut; the Wheel
must turn freely.
Press a Base Cap (85) into the Base (60).
6
90
53
3
B
A
85
11
8. Identify the Right Handrail (105). Remove the tie
from the bracket on the Right Handrail. Have a
second person hold the Right Handrail near the
Right Upright (79).
Insert the Wire Harness (86) into the bottom of
the Right Handrail (105) and out of the hole on
top of the Right Handrail.
Insert the bracket on the Right Handrail (105)
into the top of the Right Upright (79).
Attach the Right Handrail (105) to the Right
Upright (79) with three 5/16" Star Washers (9)
and three 5/16" x 3/4" Bolts (4);
do not fully
tighten the Bolts yet. Be careful not to pinch
the Wire Harness (86).
86
79
4
Hole
4
105
9
8
Tie
60
