background image

2

PROFORM

®

is a registered trademark of ICON Health & Fitness, Inc.

Part No. 145317 H00???-C R0398A Printed in USA © 1998 ICON Health & Fitness, Inc.

LIMITED FIVE YEAR MASSAGE SPA WARRANTY

ICON OF/DU CANADA INC., (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. ICON extends a limited five (5) year warranty on the spa shell structure. ICON also extends a lim-
ited two (2) year warranty on the pump and motor. This warranty extends only to the original purchaser.
ICON's  obligation  under  this  warranty  is  limited  to  replacing  or  repairing,  at  ICON's  option,  the  product
through one of its authorized service centers. All repairs for which warranty claims are made must be pre-
authorized by ICON. This warranty does not extend to any product or damage to a product caused by or
attributable to freight damage, abuse, misuse, improper or abnormal usage, or repairs not provided by
ICON authorized service personnel, to products used for commercial or rental purposes, or to products
used as store display models. Specifically excluded are damages caused by or attributable to the follow-
ing incidents: any damage to the wood exterior resulting from improper maintenance, or any damage to
the wood or tile exterior attributable to freight mishandling; damage resulting from improper winterization;
damage to the spa shell resulting from improper chemical treatment, damage to the spa shell resulting
from exposure to extreme temperatures, or damage to the spa shell resulting from exposure to direct sun-
light and ultraviolet rays while the spa is empty; damage to the pump, motor, plumbing, and components
due to improper maintenance, chemical treatment, or exposure; damage resulting from failure to proper-
ly follow user’s manual installation, operating, or maintenance instructions. Also excluded are consumable
components, including but not restricted to headrests, filter cartridges, and light bulbs. No other warranty
beyond that specifically set forth above is authorized by ICON.

ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of or damage to property including water damage, loss of revenues or profits, loss of enjoyment or use,
costs of removal, installation or other consequential damages of whatsoever nature. Some provinces do
not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limi-
tation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein.  Some provinces do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.

This warranty gives you specific legal rights. You may also have other rights which vary from province to
province.

ICON OF/DU CANADA, 900 de l’Industrie, St. Jerôme, QC J7Y 4B8

Summary of Contents for 831.100400
























Reviews: