19
5. Drain the pump (see DRAINING THE PUMP on
page 16). Once the water has drained from the
pump, place the vacuum nozzle over the
drainage hole in the pump and vacuum any addi-
tional water from the pump. Note: For additional
protection you can remove the pump/motor
from the spa to store it in a climate controlled
room.
6. Clean the spa shell (see page 16).
7. Clean the filter (see page 16).
8. Re-attach the access cover.
9. Re-attach the spa cover.
CONVERTING THE SPA TO A 240 VOLT POWER
SOURCE
The RESTORATION 510 is designed to operate with
either a 120v or 240v power source. For your conve-
nience, it is shipped ready to be plugged directly into
a 120v/15 amp home outlet.
However, you can greatly improve the performance of
the spa by converting the spa’s power supply to
receive power from a 240v power source. If the spa is
converted, it must be wired directly into a 240v GFCI
in your home by a qualified electrician.
You will need to call our Customer Service
Department toll-free at 1-888-936-4266,
Monday–Thursday, 8:00 am–6:30 pm; Friday, 8:00
am–6:00 pm EST (excluding holidays) to recieve a
free instruction guide which explains the conver-
sion procedure.
WARNING: Only a qualified electrician should per-
form the conversion procedure.
Summary of Contents for 831.100420
Page 24: ...NOTES 24 ...