Pro-Form Crosswalk 425 PFTL39707.0, User Manual

16

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the 
lowest position. If this is not done, the treadmill may be per-
manently damaged. Next, unplug the power cord. CAUTION:
You must be able to safely lift 45 pounds (20 kg) to raise,
lower, or move the treadmill.

1.

Hold the metal frame firmly in the location shown by the
arrow at the right. CAUTION: To decrease the possibility
of injury, do not lift the frame by the plastic foot rails.
Make sure to bend your legs and keep your back straight.
As you raise the frame, make sure to lift with your legs
rather than with your back.

Raise the frame about halfway

to the vertical position. 

2. Move your right hand to the position shown and hold the

treadmill firmly. Using your left hand, pull the latch knob to
the left and hold it. Raise the frame until the hole in the frame
is aligned with the latch pin. Slowly release the latch knob;

make sure that the latch pin is fully inserted into the hole
in the frame. 

To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of direct sun-
light. Do not leave the treadmill in the storage position in
temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL 

Before moving the treadmill, convert the treadmill to the storage
position as described above. 

Make sure that the latch pin is

fully inserted into the hole in the frame.  

1.  Hold the upper ends of the handrails, and place one foot

against one of the wheels.

2.  Tilt the treadmill backward until it rolls freely on the wheels.

Carefully move the treadmill to the desired location. 

To re-

duce the risk of injury, use extreme caution while mov-
ing the treadmill. Do not move the treadmill over an un-
even surface.

3.  Place one foot against one of the wheels, and carefully lower

the treadmill until it is resting in the storage position.

Wheel

Engaged

Frame

Latch

Knob

Frame