10
12. Fully insert an Adjustment Pin (29) through the
indicated hole in the Rear Upright (5) and through
the Assist Arm (9).
Attach the tether on the Adjustment Pin (29) to
the Rear Upright (5) with an M4 x 12mm Screw
(49).
11. Attach the Knee Pad Cover (14) and the Knee
Pad (15) to the Pad Frame (11) with two M6 x
75mm Button Screws (47) and two M6 Washers
(36).
11
12
47
14
15
11
47
36
49
29
5
9
10. Attach the Pad Frame (11) to the Assist Arm (9)
with two M8 x 20mm Button Screws (43), two M8
Washers (37), and two 5mm Spacers (38).
10
9
11
43
43
37
37
38
38