9
7.
Attach the Backrest Support (8) to the Rear
Upright (5) with an M10 x 62mm Button Bolt (30)
and an M10 Nylon Locknut (35).
Do not tighten
the Nylon Locknut yet.
Attach the Backrest Support (8) to the Front Top
Frame (4) with four M10 x 53mm Button Bolts
(40) and four M10 Nylon Locknuts (35).
8.
Insert the Pull-up Frame (7) into the Rear Top
Frame (6). Attach the Pull-up Frame to the Rear
Top Frame with four M8 x 15mm Button Screws
(39) and two M8 x 62mm Button Screws (41).
Tighten the M10 Nylon Locknuts (35) used in
steps 2–8.
7
8
4
35
35
8
30
35
40
40
40
5
39
39
41
41
39
6
7
9.
Attach a Pull-up Handle (12) to the Pull-up Frame
(7) with four M8 x 20mm Button Screws (43).
Slide a Pull-up Handle Cap (28) over the Pull-up
Handle and press the Pull-up Handle Cap into the
Pull-up Frame.
Attach the other Pull-up Handle (12) to the
Pull-up Frame (7) in the same manner.
12
12
43
28
7
9
43