6
2. While another person lifts the rear of the Frame (1),
attach the Rear Stabilizer (14) to the Frame with
two M10 x 73mm Button Screws (33) and two M10
Split Washers (34).
33
34
34
14
1
3
3
35
Avoid pinching the
Wire Harnesses (31, 32)
during this step
69
69
1
35
3. While another person holds the Upright (3) near the
Frame (1), connect the Upper Wire Harness (32) to
the Lower Wire Harness (31).
Gently pull the upper end of the Upper Wire
Harness (32) to remove the slack, and slide the
Upright (3) onto the Frame (1).
Tip: Avoid pinching the Wire Harnesses (31, 32)
during this step. Attach the Upright (3) with three
M10 x 20mm Button Screws (35) and three M10
Bright Split Washers (69).
2
32
31
1.
Identify the Front Stabilizer (2), which has round
wheels. While another person lifts the front of the
Frame (1), attach the Front Stabilizer to the Frame
with two M10 x 73mm Button Screws (33) and two
M10 Split Washers (34).
2
33
34
34
1
1
To make assembly easier, read the
information on page 5 before you begin
assembling the exercise cycle.
Summary of Contents for GameFit Bike PFEVEX92407.0
Page 20: ...20 NOTES...
Page 21: ...21 NOTES...
