7
2
2. While a second person lifts the rear of the Base
(1), attach the Rear Stabilizer (23) to the Base
with two 3/8" x 2 1/4" Screws (74).
74
23
1
4
3. Orient the Seat Post (3) as shown.
Loosen the indicated Post Knob (47) and pull it
outward. Then, insert the Seat Post (3) into the
Frame (2).
Move the Seat Post (3) upward or downward to
the desired position, release the Post Knob (47)
into an adjustment hole in the Seat Post, and
then tighten the Post Knob.
Make sure that the
Post Knob is engaged in an adjustment hole.
4. Orient the Seat Carriage (4) as shown.
Loosen the Seat Knob (29) and pull it downward.
Then, slide the Seat Carriage (4) into the Seat
Post (3).
Slide the Seat Carriage (4) to the desired posi-
tion, release the Seat Knob (29) into one of the
adjustment holes in the Seat Carriage, and then
tighten the Seat Knob.
Make sure that the Seat
Knob is
rmly engaged in an adjustment
hole.
Then, tighten a #8 x 1/4" Screw (92) into the
underside of the Seat Carriage (4).
3
2
3
3
4
92
47
Holes
Holes
29
