Pro-Form PFEL15910.2 User Manual Download

Page: 17 / 32

HOW TO USE THE MANUAL MODE

1. Begin pedaling or press any button on the

console to turn on the console.

A moment after you begin pedaling or press a but-

ton, the display will turn on.

2. Select the manual mode.

Each time you turn

on the console, the

manual mode will

be selected. If you

have selected a

workout, reselect

the manual mode

by pressing the

Workouts button

repeatedly until

zeros appear in the display.

3. Change the resistance of the pedals as

desired.

As you pedal,

change the resis-

tance of the pedals

by pressing the

Digital Resistance

increase and

decrease buttons. Note: After you press the but-

tons, it will take a moment for the pedals to reach

the selected resistance level.

4. Follow your progress with the display.

The lower left

display

—As you

exercise, the lower

left display can

show the elapsed

time and the dis-

tance (total number of revolutions) that you have

pedaled. Note: When a preset workout is selected,

the display will show the time remaining in the

workout instead of the elapsed time.

The lower right

display

—The

lower right display

can show the your

pedaling speed in

revolutions per

minute (rpm) and the approximate number of calo-

ries that you have burned. Note: When a calorie

goal workout is selected, the display will count

down the number of calories to be burned.

The display also shows your heart rate when you

use the handgrip pulse sensor (see step 5 on page

18).

The upper

display

—The

upper display can

show the elapsed

time, the distance

that you have ped-

aled, your pedaling speed, and the approximate

number of calories you have burned.

Press the Priority Display button repeatedly until

the upper display shows the information that you

are most interested in viewing. Note: While infor-

mation is shown in the upper display, the same

information will not be shown in the lower left or

lower right display.

The lower

display

—The

lower display will

show a track repre-

senting 640

revolutions (1/4

mile or 400 meters). As you exercise, indicators will

appear in succession around the track until the

entire track appears. The track will then disappear

and the indicators will again begin to appear in

succession.

Adjust the volume level of the console by pressing

the Volume increase and decrease buttons.

Summary of Contents for PFEL15910.2

































Search results

Summary of Contents for PFEL15910.2

Reviews:

Related manuals for PFEL15910.2

Brands by name

Popular brands

Pro-Form PFEL15910.2, User Manual

Search results

Summary of Contents for PFEL15910.2

Reviews:

Related manuals for PFEL15910.2

Brands by name

Popular brands