7
STEP 3
a:Attach the Swing tube (4L/R) to the Axle
of Handlebar post (2) with Hex bolt (21)
and Flat washer (20). But don’t tighten
them firstly.
b: Attach the Pedal tube (3L/R) to the
Cross bar (78) with washer (27) and Nylon
nut (28), But don’t tighten them firstly.
c: attach the swing tube(4L/R) with the
pedal tube (3L/R) with hex bolt(26)、bush-
ing(70)、flat washer and nylon nut(25),then
tighten the Hex bolt (21) (26) and Nylon
nut (28). Finally cover the End cap (29) &
(35)&(76) respectively.
d:Attach the Pedal (9L/R) to the Pedal
tubes (3L/R) with the Hex bolts (23), Flat
washers (24) and Nylon nuts (25).
STEP 4
Fix the Fixed handlebar (6) to the Handlebar post
(2) with the Bolts (14), Arc washers (12) and Acorn
nuts (13).
