7
STEP 4
Attach the saddle (34) to the horizontal saddle post (33),
secured the screw and nut under the Saddle.
And then fit the horizontal saddle post (33) to the vertical
saddle post (29), secured it with the flat washer (32) and
knob nut (31) as shown.
Insert the saddle post (29) into the main frame (1), secured
with the Pop –pin knob (30) at a proper height as shown.
STEP 5
Put the pulse sensor wire (4) through the hole of vertical
tube (12).
Use the T shaped bolt (25) to secure the handle cover (10)
and the handlebar (7) to the vertical tube (12) with spacer
(9) and flat washer (8).
Connect the Upper sensor wire (3) and pulse sensor wire
(4) to the computer (17), and then fix the computer (17)
to the vertical tube (12) with cross pan screw (2) and flat
washer(15).
Now your machine is ready for use.
