Pro-Form PITL50714.0 User Manual Download

Page: 10 / 20

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed

to cold temperatures, allow it to warm to room

temperature before turning on the power. If you

do not do this, you may damage the console

displays or other electrical components.

Plug in the power cord

(see page 9). Next, locate

the power switch on the

treadmill frame near the

power cord. Make sure that

the switch is in the reset

position.

Next, stand on the foot rails of the treadmill. Find

the clip attached to the key (see the drawing on

page 10), and slide the clip onto the waistband of

your clothes. Then, insert the key into the console.

After a moment, the displays will light. IMPORTANT:

In an emergency, the key can be pulled from

the console, causing the walking belt to slow

to a stop. Test the clip by carefully taking a few

steps backward; if the key is not pulled from the

console, adjust the position of the clip.

HOW TO USE THE MANUAL MODE

1. Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

2. Select the manual mode.

When the key is inserted, the manual mode will be

selected. If you have selected a preset

workout, remove the key and then reinsert it.

3. Start the walking belt.

To start the walking belt, press the Start button, the

Speed increase button, or one of the numbered

speed buttons.

If you press the Start button or the Speed increase

button, the walking belt will begin to move at 2

Km/H. As you exercise, change the speed of the

walking belt as desired by pressing the Speed

increase and decrease buttons. Each time you

press one of the buttons, the speed setting will

change by 0.1 Km/H; if you hold down the button,

the speed setting will change in increments of 0.5

Km/H. Note: After you press the buttons, it may

take a moment for the walking belt to reach the

selected speed setting.

If you press one of the numbered speed buttons,

the walking belt will gradually change speed until it

reaches the selected speed setting.

To stop the walking belt, press the Stop button.

The time will begin to flash in the left display. To

restart the walking belt, press the Start button or

the Speed increase button.

Reset

PITL50714_manual_UK_M01300.indd 10

04/07/2014 10:54

Summary of Contents for PITL50714.0





















Search results

Summary of Contents for PITL50714.0

Reviews:

Related manuals for PITL50714.0

Brands by name

Popular brands

Pro-Form PITL50714.0, User Manual

Search results

Summary of Contents for PITL50714.0

Reviews:

Related manuals for PITL50714.0

Brands by name

Popular brands