Pro-Form PITL50714.0 User Manual Download

Page: 20 / 20

ORDERING REPLACEMENT PARTS

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to

provide the following information when contacting us:

• the model number and serial number of the product (see the front cover of this manual)

• the name of the product (see the front cover of this manual)

• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED

DRAWING near the end of this manual)

IMPORTANT RECYCLING INFORMATION FOR E. U. CUSTOMERS

This electronic product must not be disposed of in municipal waste. To preserve

the environment, this product must be recycled after its useful life as required by

law. Please use recycling facilities that are authorized to collect this type of waste in

your area. In doing so, you will help to conserve natural resources and improve

European standards of environmental protection. If you require more information about

safe and correct disposal methods, please contact your local city office or the

establishment where you purchased this product.

TECHNICAL SPECS.

Product weight N.W. / G. W. : 55 / 66 Kg

Product dimensions : 178 x 84 x 125 cm (L*W*H)

Technical Information :

Motor 1.75 HP

Ref : M01300

PITL50714_manual_UK_M01300.indd 20

04/07/2014 10:54

Summary of Contents for PITL50714.0





















Search results

Summary of Contents for PITL50714.0

Reviews:

Related manuals for PITL50714.0

Brands by name

Popular brands

Pro-Form PITL50714.0, User Manual

Search results

Summary of Contents for PITL50714.0

Reviews:

Related manuals for PITL50714.0

Brands by name

Popular brands