12
13
13. Apply a generous amount of grease to a Pedal
Arm Axle (55). Next, tighten an M10 x 20mm
Patch Screw (68) with an M10 Washer (95) into
one end of the Pedal Arm Axle.
Insert the Pedal Arm Axle (55) into the Right
Upper Body Leg (72) as shown.
Repeat this step on the other side of the
elliptical exerciser.
14
14. Apply a small amount of grease to a Large
Wave Washer (89). Slide the Large Wave
Washer onto the left end of the Pedal Arm Axle
(55) in the Right Upper Body Leg (72).
Next, slide the right Pedal Arm (32) onto the left
end of the Pedal Arm Axle (55). Attach the right
Pedal Arm with an M10 x 20mm Patch Screw
(68) and an M10 Washer (95).
Then, press an Axle Cover (66) onto each end
of the Pedal Arm Axle (55).
Repeat this step on the other side of the
elliptical exerciser.
72
55
Grease
95
68
66
68 95
89
72
55
66
32 Grease
