Pro-Form XP Whirlwind 320, User Manual

17

MAINTENANCE AND TROUBLESHOOTING

Inspect and tighten all parts of the exercise bike 
regularly. To clean the exercise bike, use a damp 
cloth and a small amount of mild detergent; 

never use 

abrasives or solvents to clean the exercise bike. 
To avoid damaging the console, keep liquid away 
from the console.

CONSOLE TROUBLESHOOTING

If the console does not function properly, replace all 
the batteries at the same time. See assembly step 7 on 
page 8 for battery installation instructions. 

ADJUSTING THE BELT

The exercise bike features a precision belt that must 
be kept properly adjusted. If the belt is too tight, the 
bearings may be damaged; if the belt is too loose, the 
fan may be damaged. If the belt causes excessive 
noise or slips as you pedal, follow the steps below.

Carefully remove the 



 ve Guard Clips (76), the left 

Guard Fastener (35), and the Left Guard (13). 

See 

the inset drawing.

 Press downward on the Belt (22). 

There should be no more than 3/4 in. (2 cm), and 
no less than 1/4 in. (0.6 cm), of vertical movement 
in the center of the Belt.

If the Belt (22) needs to be adjusted, 



 rst loosen the 

right Guard Fastener (not shown). To tighten the Belt, 
turn the M6 Nuts (53) clockwise; to loosen the Belt, 
turn the M6 Nuts counterclockwise. 

See the drawing at the left. 

Make sure that the Fan 

(5) is straight, and then reattach the Left Guard (13), 
tighten the Guard Fasteners (35), and reattach the 
Guard Clips (76).

35

76

76

13

76

5

22

53

22