© Pro-Ject Audio Systems · CD Box S3 · Revision 2021.10.05
4
Play
starts playback of the first track. The display shows the current track number, the elapsed time of the
current track and the play icon.
In case of a damaged CD, it may take a little longer to process the errors and start playback or
playback might not start at all. It is possible to terminate the process with the Stop button. The
process is automatically terminated after 20 seconds.
Pause
pauses playback. The display shows the current track number, the elapsed time of the current track and
the pause icon.
To resume playback press
again.
Stop
A short press of the button stops playback. The display shows the total number of tracks on the disc, the
total duration of the disc and the stop icon.
Stepping between tracks
Press the buttons
(previous track) or
(next track). The display shows the number of the tracks as you
step, the elapsed time of the current track and the step icon. Press and hold buttons for fast scanning.
Replacing batteries
Proceed as follows:
•
Unlock and slide open the battery case cover
•
Replace the battery.
Make sure the battery is the right way round!
•
Close the battery case cover.
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries
at the appropriate collection sites - usually located at supermarkets and drugstores.
Technical parameters:
Supported formats:
Red Book CD-DA
Digital output:
1 x S/PDIF coaxial
Analog outputs:
1 x RCA
Output level:
2,0V Vrms / 0dBFS
Frequency response:
20Hz
–
20kHz / ±0,15dB
THD (analog output):
< 0,005% / 1kHz
THD (digital output):
< 0,001% / 1kHz
Noise floor:
> -120dB / 20Hz
–
20kHz
Digital to Analog converter:
PCM5102
Outboard power supply:
9V/2A DC, suitable for your country
Power consumption:
250
–
1500mA DC, < 0,5W in standby
Replacement battery remote control:
1 x CR2032 / 3V or 1 x CR2025 / 3V
Dimensions W x H x D (D with sockets):
206 x 55 x 153 (160) mm
Weight:
1330g without power supply
