© Pro-Ject Audio Systems · Pro-Ject Debut Pro · Revision 2021.09.01
3
Pro-Ject Debut PRO
Controls, features and connections
1
Motor with TPE damped flange
2
Stepped drive pulley
3
Drive belt
4
Sub-platter
5
Platter with TPE damping and felt mat
6
Tonearm counterweight
7
Tonearm rest and removable transport lock
8
Tonearm lift lever
9
Tonearm base with VTA adjustment
10
Tonearm tube
11
Lid
12
Lid hinges
13
Hinge fasteners
14
Phono output sockets and earth connection
15
Power supply socket
16
Anti-skating weight
17
Anti-skating weight support hoop
18
Anti-skating weight adjustment scale
19
Height adjustable feet with TPE damping
20
Speed selector
21
Headshell with finger lift and fitted Pro-Ject Pick it PRO
22
Single adapter
Phono cable Connect it E (not shown)
Stylus pressure gauge (not shown)
Two-point cartridge alignment protractor (not shown)
Round drive belt (78 RPM)
Flat drive belt (33, 45 RPM)
Allen key 1.5mm, 2mm
During assembly and adjustment of the deck small parts could be lost if not carefully placed in a
suitable receptacle. Before starting to assemble, get familiar with the parts listed above and
correspondingly numbered in the technical drawings above.
