© Pro-Ject Audio Systems · Pro-Ject Jukebox E · Revision 2017.10.24
4
Dear music lover,
Thank you for purchasing a record player from Pro-Ject Audio Systems.
In order to achieve maximum performance and reliability with this record player you should study these
instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse
Important notice
The following
instructions for adjusting the cartridge are provided in case the cartridge is replaced by a
different model at a later date.
During assembly and adjustment of the deck small parts could be lost if not carefully placed in a
suitable receptacle. Before starting assembly make get fwqmiliar with the parts listed above and
correspondingly numbered in the technical drawings above. Separately packed items are marked with
an asterisk *.
Safety instructions
!
The power supply is used to connect and disconnect the unit from the mains. Make sure that the
plug is easily accessible at all times.
Hold the plug when unplugging the power cord. Never
handle the power cord while your hands are wet or damp.
Avoid letting liquids enter the device. Never place any item containing liquid, like a flower vase,
on or near the device. Never spill any liquid on the device. Never place any naked flame sources,
like lighted candles, on or near the device. The product shall not be used in damp or wet locations,
next to a bathtub, sink, swimming pool or any other similar conditions.
Keep plastic bags away from children to prevent any risk of suffocation.
Platter and drive belt installation
Please remove brown paper insert which holds the platter in transport position. Put the felt mat on the
top of the platter. Install the drive belt as shown in the following illustration.
