© Pro-Ject Audio Systems · Pro-Ject Jukebox E · Revision 2017.10.24
6
Line inputs
Line level sources such as CD player, radio or TV can be connected to the input sockets marked
In1
(17).
Mains power connection
Connect the low voltage plug from the power supply to the
24V socket (20)
before connecting the
power supply to the mains.
Switching ON and OFF (turntable motor)
The rocker switch (1) on the bottom turns the motor of the turntable
To switch on from standby or to standby (amplifier)
The rocker switch (2) on the bottom turns the unit on or back into standby.
Control of the unit using the knob on the front
Standby
After the unit is powered on by the rocker switches on the bottom, pressing the knob for 3 seconds,
turns the unit on. For turn the unit back to standby press the knob again for 3 seconds
!
It is important to turn the unit to standby before it´s powered off by the switch on the bottom.
To not follow this step may cause damage to the speakers.
Input selector
After the unit is turned on, pressing the button in the middle selects desired input. After start
Bluetooth input is always selected. Pressing input button changes inputs in following order: Bluetooth
> Turntable > Line In. Bluetooth input gives a “beep” sound when selected. Selected input is indicated
on the top line of the display.
Volume
Adjust the volume to the desired level rotating the knob. Volume can be set in 33 steps (0-32) and is
indicated on the bottom line of the display
