© Pro-Ject Audio Systems · Pro-Ject RPM 9 Carbon · Revision 2015.07.10
7
Switching on and off
Pressing the speed control button (4) alternately starts and stops the motor.
Changing replay speed
Press the speed control button
STBY (4)
for starting the turntable. To change the speed from 33 r.p.m.
to 45 r.p.m., press the STBY (4) button again. Speed is correct, when the LED diode stops blinking. To
switch the turntable into STAND BY mode, hold the button STBY (4) for 3 seconds.
Mounting the optional lid (separately available)
Place the lid carefully over the record player from above.
For detailed product information please refer to the Pro-Ject web site
www.project-audio.com
.
Maintenance and cleaning
Your record player requires little or no regular maintenance. Remove dust with a slightly moistened
antistatic cloth. Never use a dry cloth because this will create static electricity which attracts even more
dust! Antistatic cleaning fluids are available at specialized stores but must be applied sparingly to
avoid damage to rubber parts. It is recommended to fit the needle cover before cleaning or maintenance
to avoid damage.
If the player is not used over a long period of time, the drive belt should be removed to prevent unequal
stretching.
!
Always disconnect the record player from the mains power supply as a precaution before
maintenance!
Useful tips
The lid (optional) is not only a dust cover but also a resonant structure likely to be excited by and to pass
into the plinth the acoustic energy emanating from your loudspeakers during replay. Therefore it is
recommended to remove the lid for achieving a better sound quality.
The record player should be positioned on a low-resonance surface such as wood or multiple layer ply
board to avoid structural vibrations disturbing replay.
Technical specifications PRO-JECT RPM 9 Carbon / Pro-Ject 9cc Evolution
Nominal speeds
33/45 r.p.m.
Speed variance
±0,1 %
Wow and flutter
±0,06 %
Signal to noise
73dB
Effective tonearm mass
8g
Effective tonearm length
9 " (230mm)
Overhang
18mm
Power consumption
12W max / <0,3W stanby
Outboard power supply
15V DC / 1,6A AC, 90-264V AC, 47 – 63Hz
Dimensions (W x H x D)
440 x 180 x 325mm
Weight
16,5kg
