© Pro-Ject Audio Systems · VC-E · Revision 2020.02.03
7
How to adjust the height of VC-E
’s
record clamp
The VC-S is pre-adjusted to spec for normal standard 80
–
180 g records. There is enough
headroom, so that the arm is optimally pressed against the record and the cleaning fluid can be
completely removed. The vacuum arm works best when it is parallel to the record when operating and
the adhesive strips is pressed gently on the surface of record. If the vacuum suction arm is not in the
correct distance from the record it may not be able to completely vacuum the cleaning fluid. In this
case it may be necessary to adjust the height of the clamp. Especially 180 g pressing need a different
set up of the distance. You will need a Phillips screwdriver (to unscrew the set screw of the clamp base
part) and a 2.5mm hexagon key (to loosen motor spindle):
1.
Disassemble the clamp (2) by unscrewing the set screw (3) from the motor flange spindle (11)
2.
Insert the 2.5mm hexagon key into the hole on the side of motor flange (11)
3.
Loosen the hexagon screw, until the flange can be moved up or down
4.
When the correct height position is found, fasten the hexagon screw and mount the clamp (2)
You do not need to fully disassemble the flange from the motor!
Service
Should you encounter a problem which the above information does not able to alleviate or identify, please
contact your dealer for assistance.
Guarantee repairs will only be affected if the unit is returned correctly packaged. For this reason we recommend
keeping the original packaging.
Never return a record cleaning machine without making sure that is it safely disassembled and correctly
packaged in the original packaging.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use and/or by transportation without the original packaging. Modification or change to any part of
the product by unauthorized persons will void the manufacturer’s warranty.
Most Pro-Ject products
–
unless expressly advertised otherwise
–
are intended for domestic use only. Using them for business
applications are done so at your own risk.
Pro-Ject Audio Systems is a Registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright
©
2019. All rights reserved.
The information was correct at the time of printing. The
manufacturer reserves the right to make changes to
the technical specification without prior notice as
deemed necessary to uphold the ongoing process of
technical development.
