background image

2

SAFETY AND GENERAL INFORMATION

Save these instructions. 

For your safety, read, understand, and follow the information provided with and on this 

device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics 

and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use 

and repair of this product may require special skills and knowledge. Instructions and safety information shall be read 

to and discussed with the operator in the operator's native language, making sure that the operator comprehends 

their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this 

device, remove from service immediately. 

Inspect before each use.

 Do not use if abnormal conditions such as cracked welds, damaged, loose or missing 

parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall 

be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an 

abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact 

distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be 

made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer. 

PRODUCT DESCRIPTION

This High Lift Floor Jack is designed to lift, but not support, one end of a vehicle. Immediately after lifting, loads must 

be supported by a pair of appropriately rated jack stands.

WARNING:

 Never use a hydraulic jack as a stand alone support device. After lifting, immediately support the 

lifted vehicle with  appropriately rated jack stands. Never place any portion of your body under the vehicle when 

lifting or lowering.

SPECIFICATIONS

Model

Capacity

Jack Length Min. Saddle Height Max. Saddle Height

F-2525

2-1/4 Ton

28"

5-5/8"

20-7/8"

 

!

!

   

WARNING

•  Study, understand, and follow all instructions 

before operating this device.

•  Do not exceed rated capacity.
•  Use only on hard, level surface.
•  Lifting device only. Immediately after lifting, support 

the vehicle with appropriately means.

•  Do not move or dolly the vehicle while on the jack. 
•  Lift only on areas of the vehicle as specified by 

the vehicle manufacturer.

•  No alterations shall be made to this product.
•  Failure to heed these markings may result in 

personal injury and/or property damage.

To avoid crushing and related injuries:

• 

Never work on, under or around a load 

supported only by hydraulic jack.

•  Chock unlifted tires in both directions.
•  Do not use this device to lift, level, lower, support 

nor move a house, mobile home, travel trailer, 

camper or any building structure.

•  Be alert and sober when using this product. Do not 

operate under the influence of drugs or alcohol.

!

   

WARNING

X

Summary of Contents for F-2525





















Reviews: