Fasten the keyhole positioning screws
Leave a space to slide tilting bracket keyhole into position
Mount the tilting mechanism
Position the tilting brackets keyholes over the positioning screws
and slide into place
DO NOT over tighten
Tilting Bracket
Tilting Bracket
Fasten the remaining M6 x 14mm Socket Cap Screws
M6 x 14mm Socket Cap Screw
ProLift G5ZELT ASSY Instructions : 0.005
M6 x 14mm Socket Cap Screw
Use the M6 x 14mm Socket Cap Screw provided
FOR STEPS 3 and 4 ATTACH ALL FASTENERS BEFORE TIGHTENING
M6 x 14mm Socket Cap Screw
3
COPYRIGHT 2017
www.proliftstand.com
www.joromfg.com