4
90 DAYS LIMITED WARRANTY
For a period of ninety (90) days from date of purchase,
SFA Companies, Inc.
will repair or replace, at its option, without charge, any of its products
which fails due to a defect in material or workmanship, or which fails to conform to any implied warranty not excluded hereby.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to
SFA Companines, Inc.
Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.
Except where such limitations and exclusions are specifically prohibited by applicable law, (1) the CONSUMER’S SOLE AND EXCLUSIVE
REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE, and (2)
SFA Companies, Inc.
SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OF ANY
AND ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF NINETY (90) DAYS FROM DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
E. REPLACING THE FUSE
(10A 5.2mm dia. x 20mm glass tube current fuse)
1. Unscrew the plastic 12V DC plug cap.
2. Gently remove 12V fuse and replace with fuse of same
rating and size.
3. Place fuse properly in position to allow installation of
plastic cap.
4. Reinstall plastic 12V DC plug cap.
TIPS FOR OPERATION
1. Ensure vehicle battery is sufficiently charged to operate
compressor.
2. If compressor does not operate when plugged into a DC
12V outlet, check connections at back of DC 12V plug
as well the receptacle fuse. Replace as needed with
a fuse of identical rating. Never replace with fuse of
Low
pressure
High
pressure
W-1706 Air Compressor Application Guide
Medium pressure
Thumb lock connector
Thumb lock connector
Needle adapter
For inflating various kind of tire with stem
For inflating various kinds
balls request medium pressure such as
basketball, volley ball etc....
For inflating or deflating
items such as air-beds, air sofa
and other low pressure inflatable.
For inflating raft, balloon and sport ball etc...
Nozzle adapters
Inflating
port
Deflating
port
Air hose inflator/deflator
adapters 4 off
Inflator/deflator
connection
socket
Air hose
higher rating. No user replaceable parts exist for this
item, refer any repairs to qualified personnel only.
3. Do not overheat the compressor, monitor cycle times
(compressor’s on and off periods). Never exceed 15
minutes continuous running. Let unit cool for 30 min-
utes, then reattempt use.
4. Operate and store in a clean, dry environment. Do not
obstruct the unit’s cooling vents.
Performance Tip:
Keep your tires inflated per the vehicle’s
owner’s manual. This will increase gas mileage and re-
duce tire wear.
SPECIFICATIONS
Model:
W-1706
Power Requirement: 12V DC Neg. Gmd
Maximum PSI:
200 psi blocked head pressure
Duty Cycle:
15 min. on/30 min. off
Power:
105W @ 12V DC
Maximum Air Flow:
0.7 CFM (high pressure)
1.4 CFM (low pressure)
