2
SAFETY AND GENERAL INFORMATION
Save these instructions for future use. Study, understand
and follow all instructions before operating this device.
The owner and operator of this device shall have an
understanding of the product and safe operating procedures
before attempting to use. If any doubt exists as to the
safe and proper use of this product, remove from service
immediately. Instructions and safety materials shall be
conveyed in the operator’s native language before use of
this product is authorized.
Inspect before each use. Do not use if bent, broken, melted,
burned or otherwise damaged components are noted.
A compressor that is damaged in any way or operates
abnormally shall be removed from service immediately. This
unit is designed for intermittent use only. Operation beyond
it’s designed duty cycle may result in compressor and/or
vehicle damage. NEVER exceed rated pressure of the item
being inflated. If rated pressure is exceeded, the item being
inflated may burst.
• Study, understand and follow all instructions before operating this device.
• When using this air compressor, basic safety precautions should always be followed to reduce risk of fire or electrical
shock.
• Do not exceed rated pressure of the item being inflated.
• Do not leave device operating and unattended.
• If DC plug fuse is blown, only replace with fuse of identical rating.
• This device contains a DC motor and components which may arc during normal operation. This arcing may ignite
flammable gases. Do not operate in a flammable environment.
• Keep out of reach of children.
• The power cord on this product contains chemicals known to the State of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling (California law requires this warning to be given to customers
in the State of California).
• Do not alter this product.
• Failure to heed these markings may result in personal injury and/or property damage.
!
WARNING
PRODUCT DESCRIPTION
The Pro-Lift 4 in 1 Air Compressor is designed and engineered
to inflate automotive and light truck tires to manufacturer’s
recommended pressure. It can also be used to inflate and
deflate low pressure inflatables such as rafts, cushions and
sports balls. Refer to the vehicle’s owners manual or inflatable
product owner’s manual before using the compressor.
HOW TO USE
A. FOR USE WITH HIGH PRESSURE INFLATABLE ITEMS
1. With thumb latch Quick Connector open, place securely
onto tire valve stem (Fig. 2).
2. Use thumb to close Quick Connector, ensuring that the
thumb latch is as far down as possible (Fig. 3).
3. Insert power cord plug-in into compressor. Insert power
cord into a suitable outlet or 12V DC source (Fig. 4).
Toggle air ON/OFF switch to ON position. Unit should
begin inflating.
4. Toggle air ON/OFF switch to OFF once desire pressure
is acheived, disconnect Quick Connector and unplug the
compressor power cord.
Fused 12V
DC Plug
Deflator Inlet
(Not Visible)
Low Pressure
Inflator Outlet
Pressure
Gauge
ON/OFF Switch
Low Pressure
inflator Adapters
Figure 1 - W-1806 Nomenclature
Quick Connect Adapters and
replacement tire stem parts
Power Cord
Power Cord
Plug-in
