3
B. FOR USE WITH LOW PRESSURE INFLATABLES
1. To inflate air mattresses, beach balls, life jackets, etc.,
remove low pressure inflator and low pressure inflator
adapters from storage compartment.
2. Connect low pressure inflator adapters onto low pres
-
sure inflator/deflator (labeled “INFLATION POINT”) on
side of compressor, and use to connect plastic air hose.
3. Insert power cord plug-in into the detached low pressure
inflator.
4. Plug the compressor into the DC 12V outlet. Toggle air
ON/OFF switch to ON position. Unit should begin inflat
-
ing.
5. Inflate to a pressure or level of firmness recommended
by the manufacturer. Toggle air ON/OFF switch to OFF
and check for desired firmness or pressure as needed.
6. Remove the adapter from low pressure inflator.
C. DEFLATING INFLATABLES
1. To deflate air mattresses, beach balls, life jackets, etc.,
remove low pressure inflator and low pressure inflator
adapters from storage compartment.
2. Connect low pressure inflator adapter onto low pressure
deflator outlet in front of low pressure inflator (labeled
“DEFLATION POINT”).
3. Insert the adapter into the appropriate receiver on the
item to be deflated.
4. Insert power cord plug-in into the detached low pressure
inflator.
5. Connect the 12V DC plug to a suitable power source and
toggle the ON/OFF switch to ON. Compressor should
begin deflation.
6. When item is sufficiently deflated, toggle ON/OFF switch
to OFF.
7. Remove the adapter from low pressure inflator.
Quick Connector
Adapters for Inflatables
Plastic air hose
inflator adapters
Sports Adapter
Hose
Figure 2
Figure 3
Figure 4
Figure 5
5. Use a tire gauge to check inflation and adjust to desired
pressure as recommended by the vehicle and/or tire
manufacturer.
NOTICE:
Always double check air pressure using a reli-
able pressure gauge.
