27
Windshield
The Plexiglas windshield assembly is molded to fit
the console
DO NOT use commercially available glass cleaners
containing harsh chemicals such as ammonia or
alcohol as this will permanently damage the
windshield. Please refer to the Service and Care
section of this manual for cleaning recommendations.
Doors, Storage and Hatches
Head Door
The poly head door is equipped with a white locking latch. To open the door, just pull the latch towards
you to open the door. To close the door, slide the door back into the track of the door frame and push the
door closed until it snaps in place. The latch will engage itself.
The door should never remain open when you are underway or when conditions might cause a
passenger to lose their balance and accidentally fall through the doorway.
The locking latch comes with a set of two numbered keys. We recommend that you make note of the key
number and keep it in a safe place. In the event that you need to replace the keys, this will allow you to
replace just the keys and not the entire lock assembly.
See the Service and Care section of this manual for cleaning recommendations.
Storage
Your boat has storage areas for your tackle and/or gear:
•
Storage compartment in the standard leaning post.
•
Storage compartment in the starboard aft corner of the console.
•
Wet/dry storage compartment aft of the casting deck.
•
Glove box with lock.
Rod Holder Storage
In addition to the rod holders installed on the optional T-top frame, the following rod holder storage is
available:
•
Rod Holders w/Inserts - One pair of stainless steel rod holders with PVC inserts to protect
your rods is installed in the gunwale. An additional pair of rod holders (installed in the
gunwale at the transom) may be added as an option.
•
Rod Racks - A pair of rod racks is installed in the port and starboard freeboard of the aft
cockpit. Combined, they can accommodate up to 6 fishing rods.
Hatches and Latches
To open the hatches just lift the handle of the latch from the recessed area of the hatch, twist it and lift the
hatch open. Make sure that all hatches are closed and secured before you get underway.
In addition to the deck hatches, there are round access pies installed on the boat that provide access to
components. The following photo identifies the locations of the components that can be accessed via the
deck hatches and access pies.
