39
•
Always clean stainless frequently with soap and water. Any cleaner safe for glass is usually safe
for stainless
•
Always remove rust spots as soon as possible with a stainless, brass, silver or chrome cleaner.
Irreversible pitting will develop under rust that remains on stainless for any period of time.
•
Always use a cleaner, like a good car wax, for added beauty and protection.
•
Never use coarse abrasives like sandpaper or steel wool on stainless as these can cause rusting.
•
Never clean with acids or bleaches.
•
Never leave stainless in contact with iron, steel or other metals, which cause contamination
leading to rust or corrosion.
•
Always protect with a wax, especially around welds to guard against micro-corrosion, cracking
and rust spots.
Additional information from Romac and G. G. Schmitt and Sons is included in your owner’s package.
Corrosion Protection
Spray all electrical connections with a good quality corrosion guard annually and whenever an electrical
connection is repaired or replaced.
If you moor your Pro-Line in salt water for extended periods, be sure to check the transom mounted anti-corrosion
anode often for operation. Check the electrical connections (green wire) on all metallic fittings with anode for
conductivity with an ohmmeter. Make sure the anode surface is exposed and not caked with corrosion and scale.
Renew the anode if it is more than 50% eroded. Your motor and/or drive unit have a sacrificial zinc anode to
mitigate the effects of electrolysis which causes corrosion. Maintain this anode in accordance with the
maintenance schedule in your engine manual.
Head and Transom Doors
The head and transom doors are made of a strong poly (i.e., starboard material). To clean the poly doors, rinse
with fresh water to remove as much grime as possible. Then, wash with a mild dish cleaning soap and warm
water or a good marine grade cleaner that is recommended for cleaning poly, plastic or vinyl. You may use a soft
bristle nylon brush for stubborn stains. Never use any harsh chemicals, abrasive cleaners or any hard objects, as
they will damage the poly/starboard material. Be sure to read the manufacturer’s directions carefully before using
any cleaning product on your boat.
Tackle Box
Clean the tackle box trays and storage area using a soft cloth, warm water and a mild detergent.
Windshield
Care Instructions - Regular cleaning with fresh water and a soft cloth will keep and protect your windshield,
window or hatch for years.
•
Glass - Use commercially available glass cleaners or a mixture of fresh water and vinegar. Do
not use abrasives, harsh chemicals or metal scrapers. Regular cleaning will help assure clarity of
the glass for safe boating.
•
Window Channels - Clean window channels with mild detergent only. Channels can be sprayed
with silicon aerosol.
•
Metal - Polish with commercially available metal polishes. A boat or car wax applied periodically
will offer extra protection against the elements.
•
Painted Surfaces - Clean with fresh water periodically. Touch up scratches and areas where
paint has chipped off with touch-up spray paint. Touch-up kits are available from the windshield
manufacturer.
Summary of Contents for 2009 26 Super Sport
Page 2: ...ii...
