32
Storage compartments beneath the captain’s seats
Storage compartment beneath the optional helm bench seat
Tackle Box - Installed behind the hatch located below the transom door. It contains 3 trays for
storing your small tackle.
Rod Holder Storage: The following rod holder storage is available:
Rod Holders with Inserts – Two pairs of stainless steel rod holders with PVC inserts to protect
your rods are installed on the gunwales.
Rod Racks - A pair of rod racks is installed in the port and starboard freeboard of the aft cockpit.
Combined, they can accommodate up to 8 fishing rods.
Four aluminum rocket launchers are installed on the optional hard top frame.
Outriggers (Optional) - This option requires the installation of the optional hard top frame. The
outrigger installation includes a pair of outrigger bases, poles and lines. The bases are
constructed of anodized aluminum and are installed on each side of the optional hard top frame.
Turn the handle at the bottom of the outrigger base to rotate the outriggers 90 degrees (from the
side to the aft end of the boat).
Bimini Top
The Bimini top frame is made of anodized aluminum The canvas top is made of high quality Sunbrella canvas.
Please see the Service and Care section of this manual for cleaning and care recommendations.
Hard Top with Storage Box (Optional)
The anodized aluminum frame comes with a fiberglass hard top and built in storage box. A set of 4 rod holders is
permanently mounted to the aft legs of the frame; providing you with additional rod holder capacity. See the
Service and Care section of this manual for cleaning recommendations for the anodized aluminum frame and
fiberglass hard top.
Note: Pro-Line installs mounting pads to the frame for additional support when outriggers are
factory installed. Before adding after market outriggers, we recommend that you consult your
Pro-Line dealer’s Service Department or another qualified service professional to add mounting
pads to the T-Top frame.
Hard Top with Storage Box and Outriggers - (Optional)
When factory installed, this option includes the same frame and storage box as above. However, with the
installation of the outriggers, we have included mounting pads for additional support.
When this option is selected and factory installed, the outrigger installation includes a pair of outrigger bases,
poles and lines. The bases are constructed of anodized aluminum and are installed on the port and starboard
sides of the optional hard top. Turn the handle at the bottom of the outrigger base to rotate the outriggers 90
degrees (from the side to the aft end of the boat).
Vinyl Upholstery
Please see the Service and Care section of this manual for information on how to clean and care for your seat
cushions and for the optional cockpit bolsters and bow cushion.
Electronics (Optional)
Based upon the availability from our vendors, this equipment changes from time to time. Therefore, we request
that you refer to the owner’s manual provided by the manufacturer of your electronics equipment for operational
Summary of Contents for 2010 26 Express
Page 2: ...ii ...
