background image

INSTALLATION AND OPERATING INSTRUCTIONS  3  

•  All components need to be installed in accordance with the user 

manual instructions for correct performance of the unit. 

 

READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATION OF THE 
UNIT

•  This appliance is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of 
experience and knowledge, unless they have been given supervision 
or instruction concerning use of the appliance by a person 
responsible for their safety. 

•  Children should be supervised to  ensure that they do not play with 

the appliance.

•  Remove and safely discard any packaging material and promotional 

labels before using the Vacuum Sealer for the first time.

•  Do not operate appliance with a damaged cord or plug or after the 

appliance malfunctions, or has been damaged in any manner. 

•  If the cord is damaged, it must be replaced by the manufacturer, its’ 

service agent or similarly qualified persons in order to avoid a hazard.

•  Do not use appliance for other than intended use.
•  Do not pull or carry the Vacuum Sealer by the cord.
•   This appliance should be used in conjunction with a safety switch.
•  To protect against risk of fire, electric shock and personal injury, do 

not immerse cord, plugs, or appliance in water or other liquid. 

•  Fully unwind the power cord before use. Connect only to 220V/240V 

power outlet.

•   Position the appliance at a minimum distance of 20cm away from 

walls, curtains and other heat or steam sensitive materials and 
provide adequate space above and on all sides for air circulation.

•   Switch unit off and unplug from wall outlet when not in use and 

before cleaning.

•   Do not use attachments not recommended or sold by the 

manufacturer as it may lead to fire, electric shock or injury.

•   Operate unit on a stable level flat surface, keep away from moving 

parts. Ensure surface is clean and free from water etc. 

•   Do not place the unit near the edge of a bench or table during 

operation.

•   Do not place the unit near an oven, heater, direct sunlight or any 

other heat source.

•   If an extension cord is used with this unit, the extension cord must 

have a rating equal to the rating of this appliance.

•   When disconnecting the cord, to avoid injury, unplug by grasping the 

plug and not the cord and ensure your hands are dry.

•   Appliance does not require or use any lubricants, such as lubricating 

oils or water.

•   Do not use outdoors or on wet surfaces.
•   Do not use appliance for other than intended purpose.

OPERATION CONDITIONS & SAFETY PRECAUTIONS

Summary of Contents for VS-I30-1

























Reviews: