background image

3

Fused 12V 

DC Plug

Figure 4

OPERATION

A. High Pressure Inflatables (Tires)

1. Remove air hose with Quick Connect from storage com-

partment and, with thumb latch Quick Connector open, 
place securely onto tire valve stem (Fig. 4).

2. Use thumb to close Quick Connector, ensuring that the 

thumb latch is as far down as possible.

3. Set the Pressure Gauge to the desired value by rotat-

ing the dial until the needle aligns with the appropriate 
pressure.

4. Remove Power Cord from storage compartment and 

insert into a suitable outlet or 12V DC source.  Toggle 
COMPRESSOR/INFLATOR switch to INFLATOR posi-

tion.  Unit will begin inflating.

5. Compressor will inflate tire (or other high pressure inflat

-

able) to the preset pressure, then automatically shut off.

6. Toggle COMPRESSOR/INFLATOR switch to OFF (cen-

ter), disconnect Quick Connector and unplug the power 
cord. Replace air hose with Quick Connect and Power 
Cord in their respective storage compartment.

7. Use a tire gauge to check inflation and adjust to desired 

pressure as recommended by the vehicle and/or tire 
manufacturer.

NOTICE:

  

If tire is at higher pressure than value set on 

gauge, compressor will not start.

NOTICE:  

Do not rotate gauge dial during inflation.

NOTICE:

  Always double check air pressure using a reli

-

able pressure gauge.

B. Low Pressure Inflatables

NOTICE:  

The automatic shut-off feature does not function 

on low pressure inflatables.

1. To inflate air mattresses, beach balls, life jackets, and 

other low pressure inflatables, remove Large Diameter 

Air Hose and air hose inflator adapters (below) from 

storage compartment.

2. Insert one end of Large Diameter Air Hose onto Low 

Pressure Inflator Outlet and appropriate plastic air hose 

inflator adapter onto other end.

3. Plug Power Cord into a DC 12V outlet.  Toggle COM-

PRESSOR/INFLATOR switch to INFLATOR position.  

Unit will begin inflating.

4. Inflate to a pressure or level of firmness recommended 

by the manufacturer.  Toggle COMPRESSOR/INFLA-
TOR switch to OFF (center) and check pressure as 
required.

5. Disconnect plastic hose adapter from inflatable, disas

-

semble adapter from air hose and store properly.

Figure 3

Figure 5

Quick Connector

Sports Adapter

Large Diameter 

Air Hose

Adapters for Inflatables

Reviews: