TEMPERATURE SENSOR INSTALLATION (continued)
3) Mount the temperature sensor on the bottom of the cabinet and tuck the excess line
back up into the cabinet.
NOTE
: It is recommended the hole under the cabinet for the temperature line be
sealed with a sealing product such as silicone.
4) Temperature Installation completed!
NOTE
: It is recommended the temperature sensor case be used for optimal
temperature reading accuracy. If using the temperature sensor case does not
work for the application, a hole can simply be drilled at the bottom of the
cabinet to allow the sensor to protrude 2” – 3” out. This will protect the sensor
from the sun while allowing a good air stream to read from.
Your ML+ is now ready for operation.
Please refer to the REMOTE KEYBOARD USERS MANUAL
for operation instructions.
Page 6
