19
‧
If you decide to use IP address from Wireless Router, select “Obtain
an IP address automatically”.
‧
If you decide to use the IP address you are desired, select “Use the
following IP address”. Make sure enter correct addresses in “IP
Address” and “Subnet Mask” fields.
‧
You must set Wireless Router’s IP address as “Default Gateway”.
‧
If the DNS Server fields are empty, select “Use the following DNS
server addresses” and enter the DNS address is provided by your
ISP, then click “OK”.
Checking TCP/IP Settings for Windows 7
a)
Click “Start”
Æ
“Control Panel“
Æ
Double-click Network and Sharing Center
icon
Æ
Select “Local Area Connection #”. (Local network your ADSL hooked
up with)
Æ
Select “Properties”
Æ
Select “Internet Protocol Version 4
(TCP/IPv4)“ then click “Properties“
Configure IP address Automatically:
b)
Select “Obtain an IP address automatically” and “Obtain DNS server
address automatically” Click “OK” to finish the configuration.
