61
3.8
Route Setup
This page is used to setup dynamic routing protocol or edit static route entry.
[Dynamic Route]
Dynamic routing is a technique developed to automatically adjust routing
tables in the event of network failures. The most common dynamic routing
protocols is RIP (Routing Information Protocol), which is very common on small
networks.
[Static Route]
It menu allows you to define your own static routes for network traffic. Follow
the instructions below to define a static router:
1. Enter the target IP address in the textbox near ‘IP Address’.
2. Enter the subnet mask in the textbox near ‘Subnet Mask’.
3. Enter the gateway IP address in the textbox near ‘Gateway’.
4. Enter the number of ‘hops’ in the textbox near ‘Metric’ (normally you can
set the value to ‘0’).