CONVENTIONAL UMBRELLA CONFIGURATION:
STEP 1:
Open the Sport-Brella. Keep the side flaps clipped up.
STEP 2:
Release the extension pole out approximately 2 feet
and tighten knob. While holding the extension pole, push the
stake straight into the ground at least 8 inches, keeping the
pole perpendicular to the ground.
STEP 3:
Secure with all 3 anchor cords, 2 in front and
1 in back.
TIP:
For extra-wide protection, unclip the side flaps and
secure with all 3 anchor cords. Secure 2 anchor cords
to the extended side flaps and 1 to the back.
PACKING UP THE SPORT-BRELLA:
Make sure Sport-Brella is dry before packing in bag.
STEP 1:
Remove any ground stakes and anchor cords and store in pouch, zip up windows
and re-clip the side flaps to the Sport-Brella.
STEP 2:
Loosen the pole knob, slide the extension pole fully into the main pole and retighten
the knob securely so the extension pole cannot slide out.
STEP 3:
Close the Sport-Brella like an umbrella. Push in the red button and slide the
Sport-Brella down. Locate the tie down cord and twist the Sport-Brella up as tight as
possible and Velcro the tie down around the umbrella. Place back into bag along with the
small pouch of components.
SPORT-BRELLA TEAM CONFIGURATION:
SPORT-BENCH IS THE PERFECT PARTNER FOR THE SPORT-BRELLA:
