pro.point 8344749, User Manual

Pen Probe Style Autoranging Digital Multimeter

7

For technical questions call: 1-800-665-8685

V 1.0

8344749

9. 

Probe of the black test lead

 (negative polarity)

10. 

Black test lead

MEASURING DC VOLTAGE

1.  Set the function switch to the   

position.

2.  Press the 

button to select DC voltage measurement. 

appears on the display.

3.  Connect the test probe and the black test lead across the source or circuit to be measured.
4.  The display shows the reading and the polarity of the test probe connection.

MEASURING AC VOLTAGE

1.  Set the function switch to the  

position.

2.  Press the 

button to select AC voltage measurement. 

appears on the display.

3.  Connect the test probe and the black test lead across the source or circuit to be measured.
4.  The display shows the reading.

MEASURING DC CURRENT

1.  Set the function switch to the    

position.

2.  Press the 

button to select DC current measurement. 

appears on the display.

3.  Connect the test probe and the black test lead in series with the circuit to be measured.
4.  The display shows the reading and the polarity of the test probe connection.

MEASURING AC CURRENT

1.  Set the function switch to the    

position.

2.  Press the 

button to select AC current measurement. 

appears on the display.

3.  Connect the test probe and the black test lead in series with the circuit to be measured.
4.  The display shows the reading.

MEASURING RESISTANCE

1.  Make sure the load to be tested is without power and all capacitors are fully discharged.
2.  Set the function switch to the 

position.

3.  Connect the test probe and the black test lead across the load to be measured.
4.  The display shows the reading.

Notes:

•  If the resistance is more than 1MΩ, it may take several seconds to stabilize the reading. This is normal 

for high resistance measurements.

•  If the probes are open, overload indication will be shown on the display.

PERFORMING A DIODE TEST

1.  Set the function switch to the  

position.

2.  Press the 

button until 

appears on the display.

3.  Connect the test probe to the anode of the diode and the black test lead to the cathode of the diode  

being measured.

4.  Read the approximate forward voltage drop of the diode on the display.