8630790
6 in. Composite Orbital Air Palm Sander
V1.0
5. Do not use for extended periods. Take frequent breaks when
using this tool.
6. Let the tool do the work. Grip the tool as lightly as possible
(while still keeping safe control of it).
WARNING! If abnormal vibrations occur, stop using this
tool immediately.
7.
Include vibration-free periods each day of work.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the parts list are included.
ASSEMBLY & INSTALLATION
INSTALLING AIR QUICK COUPLER
Prepare a standard 1/4 in. NPT male air quick coupler for use with
your tool.
1.
Wrap the external threads of the male quick coupler with sealant
tape.
a. Wrap the tape in a clockwise direction so it will
not unravel.
b. Do not tape all the threads. Leave several leading threads
unwrapped for easier alignment.
2. Screw the quick coupler into the tool's air inlet and tighten with a
wrench until snug.
3. Run the compressor at a low volume and check the connection
for air leaks. Do not use the tool until all air leaks are repaired or
the faulty component is replaced.
8
For technical questions call 1-800-665-8685
