V1.0
6 in. Composite Orbital Air Palm Sander
8630790
SANDING DISCS
The 6 in. diameter pressure sensitive adhesive sandpaper discs (sold
separately) attach to the backing pad (30), just press the sanding
disc onto the backing pad (30).
CAUTION! Disconnect the air supply when replacing the sand paper
or backing pad.
OPERATION
SANDING DISCS
Selecting the correct size and type of abrasive grit is extremely
important in achieving a high quality sanded finish. Aluminum oxide,
silicon carbide and other synthetic abrasive are best for power
sanding. To produce the best finish possible, start with a coarse grit
sanding paper and gradually change to finer and finer grit
sandpapers. A final sanding with a well-worn fine sandpaper will
produce a professional looking finish that in many cases will not need
hand sanding.
1.
Disconnect the tool from the air source.
2. Prior to attaching the sanding disc, make sure the backing pad is
free of dirt, dust and foreign matter.
3. To attach the sanding disc, simply align the sanding disc on the
backing pad.
SANDING
WARNING! Make sure the air source is set to a maximum
of 90 PSI.
1.
Connect the tool to its air source.
2. Turn the tool on by pressing down on the throttle lever (17) with
the palm of your hand. Wait until it has reached maximum speed
before placing it onto the work piece. Make sure the surface you
will be working on is free of any debris before placing the
running sanding disc onto the surface.
3. Move the tool slowly using a circular motion.
Visit www.princessauto.com for more information
9
