8868127
Soldering and Rework Station
V1.0
10
For technical questions call 1-800-665-8685
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical replacement
parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool clean, dry and free from oil/grease at all times.
6. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
CLEANING
1. Clean residue and debris from the nozzle before using the tool. The
debris can ignite when heat is applied.
2. Clean dust and debris from the air vents with a small brush. Hold
the tool so the debris will not fall inside the vents. Air must flow
through the tool unimpeded. Clogged vents will cause the tool to
overheat. The tool may fail or reach a higher temperature than
intended and damage the workpiece.
3. Clean the housing with a damp cloth after work is complete and
allow to air dry before reusing.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not
function properly or parts are missing. If unable to do so, have a
qualified technician service the tool.
