V1.0
Electric Pallet Jack
8996928
Visit www.princessauto.com for more information
11
button for 2 seconds to deactivate the slow feature. The pallet
jack will immediately stop.
d. Wait a further two seconds and turn the accelerator knobs to
the neutral position. You will need to follow the start-up again if
you attempt to use the accelerator knobs too early.
9. The load must face uphill when travelling along an incline, regardless
of which direction you are moving. Do not exceed the maximum
incline (see Specification).
POWER INDICATOR
The four Power/Fault LEDs (R) on the tiller indicates the amount of battery
charge remaining. Each LED will illuminate from left to right to indicate the
charge.
•
Green LED – 76 to 100% charge.
•
Blue LED – 51 to 75% charge.
•
Yellow LED – 26 to 50% charge.
•
4
th
LED – 0 to 25% charge.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged
or worn components. Only use identical replacement parts when
servicing.
3. Follow instructions for lubricating and changing accessories.
4. Keep the tool clean, dry and free from oil/grease at all times.
5. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
6. Remove all loads from the pallet jack before performing
maintenance.
7. Consult the Maintenance Checklist for the maintenance schedule.
WARNING! Only qualified service personnel should repair the tool.
An improperly repaired tool may present a hazard to the user
and/or others.
