9033895
Single-Phase Electric Air Compressor
V1.0
16
For technical questions call 1-800-665-8685
1. Inspect the air pressure tanks for corrosion or
other damage.
2. Replace the air filter (more often if the
compressor is used near paint spraying
operations or in dusty environments).
3. Change the compressor oil.
1. Before storing the compressor for a prolonged
period, use an air blowgun to clean all dust
and debris from the compressor.
2. Open the drain valve to release all pressure
from the tanks. This will also drain all
moisture from the tanks.
3. Clean the filter element and filter housing;
replace the element if necessary. Cover the
entire unit to protect it from moisture and
dust.
Recycle a tool damaged beyond repair at the
appropriate facility.
Visit a Princess Auto Ltd. location for a solution
if the tool does not function properly or parts
are missing. If unable to do so, have a qualified
technician service the tool.
PROBLEM(S)
POSSIBLE CAUSE(S)
SUGGESTED
SOLUTION(S)
Will not start 1. Incorrect
power supply
and/or wiring
1. Make sure
power is on
and/or consult
with
electrician
