PRO-PULSE PBN5018, Operating Manual

25

E

N

G

L

IS

h

!

!

PROBLEM

CAUSE

SOLUTION

Air leak near top of tool or at trigger 
area

Loose screws

Tighten screws

Worn or damaged O-rings or seals

Install overhaul kit

Tool does nothing or operates 
slugglishly

Inadequate air supply

Check air supply

Worn or damaged O-rings or seals

Install overhaul kit

Air leak near bottom of tool

Loose screws

Tighten screws

Worn or damaged O-rings or seals

Install overhaul kit

Tool jams frequently

Incorrect fasteners

Use fasteners of the correct size

Damaged fasteners

Replace with undammaged 
fasteners

Magazine or nose screw loose

Tighten screws

Magazine is dirty

Clean channels in magazine

Driver blade is worn or damaged

Install driver maintenance kit

Other

Contact service:  
1

-8

66-206-0888

WARNING: Stop using the tool immediately if any of the following problems 
occur. Serious personal injury may result. Any repairs or replacements must be 

done by qualified personnel or by an authorized service centre only.

CAUTION: 

„

Disconnect the tool from air supply before performing any service 
procedure.

„

When installing or replacing O-rings, be sure they are clean and 
lubricated with an O-ring lubricant.

TROUBLEShOOTING

WARRANTY

Thank you for investing in a PRO-PULSE power tool. These products have 
been made to demanding, high-quality standards and are guaranteed for 
domestic use against manufacturing faults for a period of 12 months from the 
date of purchase.

This guarantee does not affect your statutory rights. In case of any malfunction 
of your tool (failure, missing part, etc.), please contact one of our service 
technician at our toll free service line at 1-8

66-206-0888

 from 8 AM to 

6 PM, Monday to Friday, Eastern time. RONA reserves the right to repair or 
replace the defective tool, at its discretion. 

Normal wear and tear, including accessory wear, is not covered under 
guarantee. The product is guaranteed for 12 months if used for normal 
trade purposes. Any guarantee is invalid if the product has been overloaded 
or subject to neglect, improper use or an attempted repair other than by 
an authorized agent. Heavy-duty, daily professional or hire usage are not 
guaranteed. Due to continuous product improvement, we reserve the right to 

change the product specification without prior notice.