HDMI 8Ports Splitter Amplifier by Cat5 x1
２
HDMI 8Ports Splitter Amplifier by
Cat5 x1
Dear Customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
1.0 INTRODUCTION
This HDMI Splitter is an HDMI splitter with eight RJ45 outputs. It distributes the
input of the HDMI signal into the eight identical outputs simultaneously. Eight
HDMI Extender Receivers by Cat5 x1 receive the distributed signal from the
splitter and transmit to displays individually.
Each receiver works with the splitter as a full functional module. Only by the most
inexpensive UTP cable with cross stand inside the full functional module extend
the HDTV display up to 50 meters for 1080p.
This HDMI Splitter offers solutions for HDTV retail and show site, HDTV, STB,
DVD and Projector factory, noise, space and security concerns, data center
control, information distribution, conference room presentation, school and
corporate training environments.
1.1 FEATURES
This HDMI Splitter has many features that enable it to perform in a superior
manner. Among those features you will find:
Easy to Use: Install in seconds, no need of setting.
One pair as a full functional module,
One piece of CAT-5e/6 cable can substitute HDMI cable to achieve long
distance transmission.
Follow the standard of IEEE-568B.
Transmission distance can be up to 50 meters for 1080p using UTP cable with
cross stand inside.
Supports highest video resolution 1080p.
Supports 165MHz/1.65Gbps per channel (4.95Gbps all channel) bandwidth.
Supports 8bit per channel (24bit all channel) deep color.
Supports uncompressed audio such as LPCM
2.0 SPECIFICATIONS
Signal Inputs/Output
Input DDC Signal
5 volts p-p (TTL)
Maximum Single Link Range
1920X1080p
Output Video
HDMI
