4
IR User Guide:
•
IR receiver extension cable should be connected to the IR IN port of the receiver.
•
The IR emitter extension cable should be connected to the IR OUT port of the
transmitter.
•
The emitter of the IR extension cable should face as close as possible to the IR
receiving window of the source device.
•
Face the receiving head of the IR receiver extension cable toward the user for
unobstructed line of sight to the remote control.
•
The IR receiver detects the users remote control and transmits the signal down the
network cable to the IR emitter which replicates the IR output to control the source
device.
CAT CABLE REQUIREMENT
Follow the standard of IEEE-568B, It is recommended to select a high quality network
cable with less loss and crosstalk.
