3
Receiver
1. Reset Button
Press to restart the device
2. HDMI output
Connect with HDMI display device
3. IR in
Connect with IR receiver extension cable, please make sure
the remote control used is within the effective range
1. Reset button
Press to restart the device
2. HDMI input
Connect with the source device
3. IR out
Connect with IR extension cable
4. Transmission LED
Illuminates during data transmission
5. Connection LED
Illuminates when a good network connection is attained
6. RJ45 signal output Connect with network cables
7. 12VDC input
Connect with 12VDC/3A power adapter
1
2
3
CAT CABLE REQUIREMENT
Follow the standard of IEEE-568B, It is recommended to select a high quality network
cable with less loss and crosstalk.
INSTALLATION
•
Connect the HDMI input on the extender with the source device.
•
Connect the extender TX RJ45 output ports to the receivers either directly using
CAT6 or better cable, or using high quality patch cables, connect via an existing
network.
•
Connect HDMI output of HDMI extender RX to HDMI input of HDTV and set the TV
source input to correct HDMI input channel.
•
Connect the power supply output to the extender 5V DC input and connect the PSU
to the mains and turn on the power. The power LED on the front of the extender
should illuminate.
•
The receivers do not require external power.
