3
Front Panel
Remote Control
INSTALLATION
•
Connect the HDMI inputs to up to three source devices.
•
Connect the RS232 to a PC using a suitable cable if you wish to use a PC to control
the switching.
•
Connect HDMI output to the HDMI input of HDTV and set the TV source input to
correct HDMI input channel.
•
Connect the power supply output to the extender 5V DC input and connect the PSU
to the mains and turn on the power. The power LED on the front of the extender will
illuminate.
•
Using the remote control (or PC) select the desired input source using the 1 - 3
buttons or the < > buttons. The relevant LED on the front panel will illuminate to
indicate which channel is active.
•
The switch can be powered on or off also with the button on the remote control.
Power button - switches the device on or off.
1 - 3
buttons directly select the relevant input channel.
<
or
>
buttons selects next or last input channel.
