Specifications:
Bands
: 20 - 15 - 10m
Gain:
0dBd
Max power:
2Kw pep SSB, 1Kw RTTY-CW or in accordance with balun max power.
Half dipole lenght =
about 4m (depend from the tunig set)
Rotating radius
= about 3m
Wind area
= about 0.2m2
Mast diameter
= 40-50mm
Weight
= about 7kg
Max wind
= 130Km
Material
= Alluminum 6060-T6, SS hardware.
Performance:
The antenna has eno bandwidth to cover the whole segment assigned to each single band with
maximum SWR of 2:1 to extremes, the mean SWR in band center less than 1: 5.
Performance may vary depending on the environmental conditions in which the antenna is installed.
If you can, do not install it at a height of less than 5m from the roof or ground.
Kit 6m (optional)
The 6m kit must be installed as in the photo below.
For improvements and technical - production, specifications and design are subject to change,
without affecting the final pourpose of the product.
