WARNING!!
All images and drawings, in this user manual, are indicative, with the sole purpose of helping
the assembly, they may not explain exactly the product, which may be subject to changes
without obligation to anyone, without prejudice to the final specifications.
Due wire radials antenna will have greater performance if installed 10-20cm over the ground with
radial on the soil or roof. If the space is not enought for a complete wires extension, they can be
coiled on the ground around the antenna base in a spiral-shaped design.
Before to rise up antenna in the sky, make sure that all bolts and connections are well tightned.
Do not seal traps and tubes.
Install guy wires on 20mm tube as suggested in the picture below and make sure
to install them at 120 degrees, 4-5m or more, away from the antenna base.
Technical specifications:
Height: 10.5 m approximately
Weight = 6.5Kg
Wind area = 0.2m2
Max wind = 130 km/h with guy wires
Accept mast 40-50mm (60mm on request)
6060T6 aluminum, stainless steel bracket and bolts.
Note:
antenna could be influenced due local environments.
If possible avoid to install it close to metal object parallel to antenna radiator.
The antenna length can change in according with setting and/or possible environmental influences
Average usable bandwidth (if swr = 1:1):
40m = ~ full band with swr <=2:1 on the band limits
Specifications may change without notice.
