INTRODUCTION
Operating Manual No: PWOM-215/250MP-001
Page 14
© 2018 Global Welding LLC
SECTION 3 – INTRODUCTION
3.1
Description
The Multi-Process P
RO
-
TEC
215MP and P
RO
-
TEC
250MP welding
machines features:
---
Multiple Input Power, 1 Phase 120 / 208 / 230 / 240 VAC.
---
Extremely Portable inverter welding machines with excellent
welding characteristics.
---
Self contained MIG (GMAW/FCAW) Wire Welder.
---
P
RO
-
TEC
MIG Gun or Spool Gun operation.
---
Performs MIG (GMAW/FCAW), STICK (SMAW) and LIFT TIG
(GTAW) welding processes.
---
A multitude of features are designed into these machines to
satisfy the broad operating needs of the DIY or professional
welder.
---
Memory Save/Recall Button enables you to Save or Recall a
total of nine of your favorite weld programs.
---
Full color digital LCD displays preview weld parameters then
actual weld parameters when welding.
---
Fully compliant to CAN/CSA-E60974-1 & ANSI/IEC 60974-1.
This Operating Manual explains how to safely and correctly set up
these welding machines and provides recommendations on how to
achieve quality from the Power Source. Please read this Operating
Manual thoroughly before operating the P
RO
-
TEC
215MP or P
RO
-
TEC
250MP welding machines.
3.2
Transportation Methods
Disconnect
Power Source
before moving
Falling Power
Source can
cause serious
personal injury
Lift the Power Source only with handle on top of case. Use handcart
or similar device of adequate capacity and secure Power Source
before transporting.
3.3
215MP/250MP Duty Cycle at 120 VAC
The rated duty cycle of the Power Source, is a statement of the time
it may be safely operated at its rated Welding Amperage output.
MIG (GMAW/FCAW) @ 120 VAC/15 A Outlet
(35% Duty Cycle at 110 A)
3.5 Minutes Welding
in any 10 Minute Period
6.5 Minutes Non-Welding
in any 10 Minute Period
MIG (GMAW/FCAW) @ 120 VAC/20 A Outlet
(35% Duty Cycle at 140 A)
3.5 Minutes Welding
in any 10 Minute Period
6.5 Minutes Non-Welding
in any 10 Minute Period
STICK (SMAW) @ 120 VAC/15A Outlet
(35% Duty Cycle at 100 A)
3.5 Minutes Welding
in any 10 Minute Period
6.5 Minutes Non-Welding
in any 10 Minute Period
STICK (SMAW) @ 120 VAC/20A Outlet
(50% Duty Cycle at 110 A)
5 Minutes Welding
in any 10 Minute Period
5 Minutes Non-Welding
in any 10 Minute Period
Lift TIG (GTAW) @ 120 VAC/15 A Outlet
(40% Duty Cycle at 140 Amps)
4 Minutes Welding
in any 10 Minute Period
6 Minutes Non-Welding
in any 10 Minute Period
Lift TIG (GTAW) @ 120 VAC/20 A Outlet
(60% Duty Cycle at 140 Amps for 215MP
and 70% Duty Cycle at 140 Amps for 250MP)
6 Minutes Welding
in any 10 Minute Period
4 Minutes Non-Welding
in any 10 Minute Period
3.4
215MP Duty Cycle at 208/230/240 VAC
The rated duty cycle of the Power Source, is a statement of the time
it may be safely operated at its rated Welding Amperage output.
MIG (GMAW/FCAW) @ 208/230/240 VAC
(25% Duty Cycle at 200 A)
2.5 Minutes Welding
in any 10 Minute Period
7.5 Minutes Non-Welding
in any 10 Minute Period
STICK (SMAW) @ 208/230/240 VAC
(25% Duty Cycle at 200 A)
2.5 Minutes Welding
in any 10 Minute Period
7.5 Minutes Non-Welding
in any 10 Minute Period
LIFT TIG (GTAW) @ 208/230/240 VAC
(25% Duty Cycle at 200 A)
2.5 Minutes Welding
in any 10 Minute Period
7.5 Minutes Non-Welding
in any 10 Minute Period
