Important Information
Read this user’s manual carefully before use. It contains important
information and notes regarding operating.
The RECON X5 may not apply to the below cases:
■
Repairs or product modification and alterations have been executed
by unauthorized service personnel.
■
Damages is caused by accidents including but not limited to lighting,
water, fire, or moisture.
■
Do not use power with specific power rating not compliant in the
specification.
■
The serial number on the product has been altered, deleted, removed
or made illegible.
Danger
: Be careful with electricity.
■
Power to the units must be switched off before any work is undertaken.
■
When the unit is not used for a long period, disconnect them from the
power source.
Warning
■
Do not open the product.
■
Indoor use only.
■
Do not block the ventilation slots on the product.
■
Put the product away from direct sunlight or any source of heat.
■
Do not spill liquid on the product, especially with corrosive liquids.
■
To reduce the risk of fire or electric shock, do not expose the RECON
X5TX and RECON X5RX to rain or moisture.
Special Notice
■
Never use this product nearby an aircraft or high-accuracy electronic
instrument, It will cause an interference and wrong effect on the
operation.
■
Never use this product in the following location where wireless wave
will cause the abnormal video and audio (noise, blocked image...etc,).
1. Installed in the walls with hard accessible material.
2. This device should be situated away from the refrigerator or metal
fitment.
3. Crowded place.
■
This product has been tested and manufactured to comply with each
country’s safety rules. However, there is no guarantee that interference
will not occur in a few particular installation. If the interference is
happened, increase the separation distance between RECON X5TX
and RECON X5RX.
■
RECON X5 is susceptible to interference from 5GHz wireless device,
such as router or other wireless device.
■
Do not put RECON X5TX and RECON X5RX in a metal rack, which
may hinder the wireless communication.
■
When wireless transmission is beginning, the product takes about
15-20 seconds to start the system, the media receiver can not be
operated during this time.
■
Do Install the external antennas before use.